Panduan - Pemasangan Pagar Listrik Kejut - Gedung / Bangunan / Penjara / Menara BTS / Villa / Cottage
Quick OverviewTH- Guard 2 SAFETY INFORMATION Unless high/low voltage output disarmed of electric fence, don’t touch live fence Always unplug the fence before handing any part of the fence. Don’t install electric fence during the thunder, don’t install ...
TH- Guard 2 SAFETY INFORMATION
- Unless high/low voltage output disarmed of electric fence, don’t touch live fence
- Always unplug the fence before handing any part of the fence.
- Don’t install electric fence during the thunder, don’t install controller in moist place.
- Before installation or using the product, professional training on technology is necessary
- To maximizing the performance of your fence system,During the installation, follow the instructions to make sure the grounding of products. Refer to “4.9 item”
- Once electrified , the inside of controller is 220v 50Hz AC, with 5-10KV high voltage pulse on the output port , don’t touch any part to make sure safety
- The related electronic technology knowledge is necessary, read the user instruction and operate it carefully with correct methods before installation, otherwise,our side don’t bear any responsibility if any accident arise.
- In case of urgency, turn off power supply, and wait for the professional staffs to checkã€ analysis and repair ,or contact our company, don’t repack it by your own.
- Follow all national,state and local regulations that may apply to installation of electric fence in your area
- Refer to authorized repair center or our company for service,There are no ueser serviceable parts,Never alter the design of the energizer ,doing so is dangerous and will void the warranty.
- Do not run fence wire above ground near high voltage power lines.if too close,the electric fence may pick up dangerous levels of power from high voltage lines.Never cross under a high voltage line with electric fence.
- Sparks may occor in electric fence system,Therefore,the area of high fire risk,fence should not be installed.Energiser
- Perimeter security single zone electric fence energiser,generates high voltage pulse of 5-14kv to intruders teaching the fence,which establishes a phycical and sychological barrier to prevent invasion
New generation energizer that can be used as a simple security fencing energizer, but can also be a alarm panel, there are two alarm input for gate magnetic contacts or Infrared detector or other kind of sensor and detector with NO/NC output.
- LCD or LED indicate the zone ID\ the working state \ the voltage of live wire.
- High/low voltage switch manually, long-distance equipment auto switch function.
- RS 485 communication protocol offer long distance management solution.
- DC12V, NC/NO dry contact alarm output(Relay output), can work with other modern security products.
- Set up alarm delaying triggered time freely
- Spacious space is enough for 4-7Ah back up lead acid battery.
- Multi power supply function make the energizer working at all kind of poor power condition, Mains AC110-240V, Battery or Solar panel with DC12V.
- Sealed metal casing would reduce the electromagnetic radiation effectively, preventing the invisible damage to our family health or other electrical equipment.
- Remote control(wireless) makes the arming or disarming easily from any place.
Electrical specification :
1. Input: AC110-240V or DC12V
2. Output peak voltage: 5KVï½ž10KV
3. Output low voltage: 1KVï½ž3KV
4. Pulse duration: ≤0.1s
5. Pulse interval time: 1s
6. Max energy of output: <5.0J
*Jika gambar kurang jelas, silahkan Klik Kanan » View Image pada gambar